014-1062-030 - Follower plate for pumps with shank 30 mm subgroup-Vaste installaties Inlet : F1/4"G

Inlet : F1/4"G

for medium-long distances (150 -240 m)

014-1051-030 320 mm deksel

De vetpomp heeft een ratio van 60:1

workshop for industrial vehicles in which is

014-1062-030 - Follower plate for pumps with shank 30 mm subgroup-Vaste installaties Inlet : F1/4"GIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.